Low Alloy Steel
FABTIG ER70SB2L
- Low alloy Chromium Molybdenum Wire designed for high strength
- Exhibits greater resistance to cracking
- Smooth wire feeding
- Excellent strength of welds
FABTIG ER80SB2
- The wire is copper coated for creep-resistant steels like SA-387 Grade 11, A335 Grade P11 and equivalent materials.
- A necessary control of pre-heat, interpass temperature & PWHT is essential to avoid cracking
- Copper coating is uniform
- The wire feeding is smooth
- Radiographic weld quality
FABTIG ER80SB3L
- Copper coated wire with 2.20% Cr and 1% Mo content, with low
carbon concentration - Provides high strength welding
- Smooth wire feeding
- Excellent strength welds produced
- The weld beads are uniform
FABTIG ER80SB6
- The wire is copper coated low alloy steel filler wire
- The copper coating is uniform for smooth wire flow
- Especially for 5%Cr-0.50%Mo creep resisting steel
- Effective where there is requirement of high strength
- Better corrosion resistance
FABTIG ER80SB8
- The wire is copper coated low alloy steel filler wire
- The copper coating is uniform for smooth wire flow
- Control over pre-heat, inter pass temperatures required
- Highly resistant to elevated temperature creep and heat
- The weld produced is Radiographic quality
FABTIG ER80SD2
- Low alloy steel Mg-Mo copper coated wire
- The weld deposit has excellent tensile strength as much as 560MPa
- Contains 0.5%Mo for good strength and stress values
- Excellent toughness characteristics at sub- zero temperatures
- Porosity free radiographic welding
FABTIG ER80SG
- Low alloy steel manganese molybdenum copper coated wire
- The weld deposit has excellent tensile strength as much as 560MPa
- Gives good wetting, rust and scale tolerance
- Weld deposits resistant to cold cracking
- Radiographic weld quality
FABTIG ER80SNI1
- Low alloy steel wire copper coated with 1% or min
addition of Ni - The weld deposit has excellent tensile strength as much as 560MPa
- Capable of producing high toughness with max 1%Ni
- Radiographic weld quality
- Gives high impact at -45°C for medium quality welds.
- Uniform copper coating
FABTIG ER80SNI2
- Low alloy steel wire copper coated with 2.5% or min
addition of Ni - The weld deposit has excellent tensile strength as much as 560MPa
- Capable of producing high toughness with max 2.5%Ni
- Radiographic weld quality
- Gives high impact at -60°C for medium quality welds.
- Uniform copper coating
FABTIG ER80SNI3
- Low alloy steel wire copper coated with 3.5% or min
addition of Ni - The weld deposit has excellent tensile strength as much as 560MPa
- Capable of producing high toughness with max 2.5%Ni
- Radiographic weld quality
- Gives high impact at -100°C for medium quality welds.
- Uniform copper coating
FABTIG ER90SB3
- Low alloy steel solid filler rod copper coated
- Excellent high strength and toughness after PWHT
- It fulfils the X-factor requirements
- Radiographic weld quality
FABTIG ER90SB9
- The wire is copper coated low alloy steel filler wire
- Uniform copper coating
- The wire feeding is smooth
- Radiographic weld quality
- Improved and offers long term creep properties
FABTIG ER90SD2
- Added with high level of deoxidizers for defect free welds
- Excellent low temperature toughness
- Uniform copper coating
- To increase the strength Mo is added
- Porosity free radiographic welding
FABTIG ER90SG
- Copper coated high in strength low alloy steel wire
- The weld deposition rate is high, it gives smooth wire flow
- Uniform and shiny weld beads formation
- Radiographic weld quality
FABTIG ER100SG
- For producing welds with high tensile strength as much as 700Mpa
- Can be used where consumables with less than 1%Ni is required
- Smooth wire feeding with low spatter occurrence
- Radiographic weld quality
FABTIG ER110SG
- The wire exhibits high strength and low temperature toughness
- Excellent welding characteristics
- Excellent impact strength at low temperatures
- Radiographic weld quality
FABTIG ER120SG
- The wire exhibits excellent mechanical properties of weld metal and good toughness characteristics
- Specially made for high strength steels
- Radiographic weld quality
FABTIG ER70SA1
- Copper coated Carbon Molybdenum Wire.
- The wire strength increases at elevated temperatures
- The weld is of radiographic quality with shine on upper surface
- The wire feeding is smooth which results in stable arc for
ease in welding - The weld beads are uniform
Have any questions?
sales.bo@shakunt.com
Have any questions?
export@shakunt.com
Call us
